Power Connection and Cord Length Options for Heat-Line Heating Cable Systems - Heat-Line Freeze Protection Systems

Power Connection and Cord Length Options for Heat-Line Heating Cable Systems

Heat-Line provides pre-manufactured self-regulating heating cable systems with two standard power connection options. Option one is a ground fault protected GFC Model, with an integral 27 milliamp ELCI/GFCI which plugs into a standard 120 volt or 240 volt receptacle. Option two is a cord-set only CS Model, where the product is supplied with a 6 foot long hard usage SJOOW cord for direct hard wire to your power supply and or thermostat.

Listen to this month’s video blog and learn directly from a Heat-Line specialist about the standard power connection options and power cord lengths available on most Heat-Line systems

Related Posts
Tips for Installing Your Heat-Line Heating Cable System

Tips for Installing Your Heat-Line Heating Cable System

Installing heating cables can be an intimidating experience whether it is your first or tenth time. That is why Heat-Line does their very best to...

Submersible Pump Wire for Lake and River Applications

Submersible Pump Wire for Lake and River Applications

Hello and welcome to the May 2018 Heat-Line Vlog. Most people are familiar with the standard four coloured TWU wire installed with submersible pumps in...

How to Measure Self-Regulating Heating Cable for EDGE-CUTTER Roof De-Icing Systems

How to Measure Self-Regulating Heating Cable for EDGE-CUTTER Roof De-Icing Systems

EDGE-CUTTER channel flashings are designed to prevent ice build-up, icicles or ice dams on the roof when used in tandem with Heat-Line’s Paladin for Roof...