Retro-Line 90 Degree to Water - Heat-Line Freeze Protection Systems

Retro-Line 90 Degree to Water

Hello and welcome to the December 2018 Heat-Line Vlog. The final vlog of 2018.

The standard Retro-Line in pipe heating cable system from Heat-Line comes setup for the water to pass straight through the interface connection. This is the most common requirement for many installations. In some installations however the ability for the water to pass through the interface connection in a 90 degree turn format is ideal. As a result you have the option to order a Retro-Line directly from Heat-Line in a 90 degree to water format for most common .075”, 1.00” and 1.25” ID pipes.

In some cases though, you may also need to change shorter lengths units right on site. This is possible when proper care is taken and proper direction is followed.

Listen to Decembers video blog and learn directly from a Heat-Line specialist about how it is possible to convert a standard Retro-Line tee adapter to 90 degree water.

Related Posts
Retro-Line Mini in Half-Inch PEX: Maintain Flow Rate with Half-Inch to Three-Quarter-Inch PEX Intersection

Retro-Line Mini in Half-Inch PEX: Maintain Flow Rate with Half-Inch to Three-Quarter-Inch PEX Intersection

The Retro-Line Mini is a self-regulating in-pipe heating cable system engineered for small-diameter pipes, including three-quarter-inch and half-inch PEX. In half-inch PEX, there can be...

Selecting The Proper Heat-Line Product

Selecting The Proper Heat-Line Product

Hello and welcome to the July 2018 Heat-Line Vlog. Since inception in 1988 Heat-Line's product group has expanded from 1 to over 14 different solutions....

Retro-Line Ordering Information

Retro-Line Ordering Information

Hello and welcome to the October 2018 Heat-Line Vlog. For applications where water supply pipes are not accessible Heat-Line offers the Retro-Line internal pipe freeze...